Lubricants

Please call us on (03) 9872 3900 or Email Enquires on the form at bottom of page

SIN BRAKE FLUID 500ml

The ultimate Super DOT 4 high temperature brake fluid, offering better compatibility with system components compared to silicone or silicate ester type products. SIN Brake Fluid is a premium full synthetic polyalkylene glycol ether ester based brake fluid for long life and maximum performance.

Application: Ideal for brake systems in high performance on-road vehicles and in all types of cars, trucks and motorcycles involved in all forms of competition including rally and circuit racing. Penrite SIN Brake Fluid has been tried and tested in Australian conditions in many forms of motorsport including V8 Supercars and GT Race Cars.

Usage Notes: For best results, the following change intervals are recommended:

On-Road Use 12 months, Club Racing 6 months High braking loads in extreme service competition After each meeting Do not mix with DOT 3 or silicone DOT 5 fluids.

Do not use in vehicles with alloy cylinders or reservoirs that contain a high percentage of magnesium. Silicone type assembly compounds should not be used in conjunction with this product.

Customer Benefits

• Excellent braking response due to high boiling point of fluid (600F).

• High wet boiling point ensures long term retention of fluid performance, even under the most severe conditions.

• Better performance in on-road use for life of fluid compared to conventional Super DOT 4 fluids.

• No need to change hoses and rubbers if upgrading from the original fluid as it is compatible with all common brake system materials.

• Compatible with DOT 5.1 (low temperature, non-silicone type).

The Healey Factory Code: SINBF

RRP A$36.65

________________________________________________________________________________________

GEAR BOX OIL 30W 1 litre

Multigrade gearbox oil meeting the requirements of API GL-1.

Many cars manufactured in the fifties and sixties specified engine oil (usually the same as that recommended in the engine) for use in the gearbox. Whilst it was convenient to offer this recommendation, no doubt a proper gear oil would have been a better alternative. This gear oil has been designed for this type of recommendation.

Application : Both oils can be used in vintage, veteran and classic gearboxes including those fitted with overdrives and those vehicles fitted with pre-selector gearboxes.

Gearbox 30 is an SAE 20W-60 oil designed for use where monograde 30 oils were originally specified.

Customer Benefits

• Do not contain friction modifiers so will not cause overdrives and pre-selector bands to slip.

• Do not contain EP additives so are compatible with synchro cones and other metal parts.

The Healey Factory Code: GB30

RRP A$11.00

_________________________________________________________________________________________

PREMIUM 5 5litre

The ultimate in extreme performance engine oils, 10 Tenths Premium Full Synthetic Engine Oils combine unique viscosity grades with cutting edge technology to deliver maximum engine protection in all conditions. They use shear stable viscosity modifiers and a combination of synthetic PAO (Group 4) and ester (Group 5) base oils, contain full zinc levels and exceed the requirements of API SN/CF and JASO MA.

Application: Penrite 10 Tenths Premium 5 is an SAE 5W-60 oil specifically designed for use in high performance modern petrol engines in all types of vehicles, both on the road and on the track. Penrite 10 Tenths Premium 5 is recommended for use where SAE 5W-50 oils are specified and it is deemed necessary to have a fully man made synthetic engine oil. Such conditions include short-term high load competition, in extremes of both ambient and engine operating temperatures and where the manufacturer has specified the use of a fully synthetic engine oil. Ideal for use in engines sizes from 1 cylinder to 12 (or 16!) cylinders and also in motorcycles with wet clutches. Replaces SIN 5.

Customer Benefits

• Recommended for naturally aspirated, supercharged and turbocharged engines.

• Suitable for use with E85, avgas, methanol and nitro as well as conventional fuel.

• Longer engine life by reducing formation of high temperature engine deposits.

• Wear reduction from use of a combination of ultra-pure synthetic base oils and a European-standard additive package.

• Potentially longer oil life even in high performance vehicles.

• Reduced oil consumption due to use of highly specialised, ultra-pure, low volatility synthetic base oils.

• Very fast flow at start-up combined with full-bodied high temperature protection

• Has Penrite’s Extra 10 for extra protection at operating temperature.

The Healey Factory Code: PREMIUM5

RRP A$67.65

________________________________________________________________________________________

RUNNING IN OIL 5ltrs

Penrite Running-In Oil is a SAE 15W-40 engine oil meeting the requirements of API SF/CC specifically formulated to provide the best possible lubrication during the critical run-in period while enabling the engine parts to achieve the correct level of wear to enable good gas sealing of piston rings to cylinder walls.

APPLICATION: Designed for the running in of mainly older design rebuilt engines.

Fill the engine sump with the correct quantity of Penrite Running-In Oil.

Drive the car under moderate loads and revs for 500 km (300 miles) and then carry out normal oil drain procedures. Refill the engine with appropriate HPR grade and drive the car under normal conditions but not under excessive loads for a further 2000 km (1200 miles). Drain the oil and replace with the appropriate HPR series lubricant. Oil filter changes should be made each time the engine lubricant is replaced.

Customer Benefits

• Protects valve train components from scuffing and premature wear as it contains the optimum level of anti-wear additive (zinc dithiophosphate).

• Low levels of dispersant/detergent to enable the bedding in of piston rings and cylinders.

• Contains no friction modifiers which can stop the run-in process from being achieved.

• 15W-40 Viscosity to enable good lubrication and oil flow to be provided at wide temperature ranges from cold weather start ups to hot temperature running.

The Healey Factory Code: RUN005

RRP A$40.40

________________________________________________________________________________________

HPR 30

HPR 30 is a premium mineral SAE 20W-60 non-friction modified petrol engine oil formulated with additives of the highest standards to give enhanced protection against wear, corrosion, oil oxidation and sludge under tough Australian conditions.

Application : HPR 30 is designed for use in petrol engines including multi-cam, turbocharged and naturally aspirated. It is particularly suited for use under high load conditions such as towing and where ambient temperatures are high.

Also provides added protection for small capacity engines of six cylinders or less that are showing signs of excessive oil consumption.

Customer Benefits

• Greater engine protection at high operating temperatures compared to 20W-40 and

20W-50 oils

• High operating temperature viscosity helps to control oil consumption and maintain

oil pressure under arduous conditions

• Longer engine life by reducing formation of high temperature engine deposits

 1 litre

The Healey Factory Code:HPR301

RRP A$12.55

5 litres

The Healey Factory Code:HPR30

RRP A$51.70

________________________________________________________________________________________

HPR 40 5 litre

HPR 40 is a premium mineral 25W-70 non-friction modified, high viscosity engine oil. It is formulated with a combination of additives of the highest standards to give enhanced protection against wear, corrosion, oil oxidation and sludge while controlling oil consumption under tough Australian conditions.

Application: HPR 40 is designed for use in older design, large capacity six and eight cylinder petrol engines including those fitted with aftermarket turbochargers. Especially suited for use in these types of engines which may be showing signs of oil consumption. Suitable for use in selected competition applications including speedway, drags and circuit racing.

Customer Benefits

• Superior operating temperature viscosity helps to control oil consumption and maintain oil pressure under arduous conditions.

• Longer engine life by reducing formation of high temperature engine deposits and by wear reduction from a high operating temperature viscosity.

The Healey Factory Code:HPR40

RRP A$51.70

________________________________________________________________________________________

HPR 50 5ltrs

HPR 50 is a premium mineral 40-70 non-friction modified, high viscosity engine oil. It is formulated with additives of the highest standards to give enhanced protection against wear, corrosion, oil oxidation and sludge while controlling oil consumption under tough Australian conditions.

Application: HPR 50 is designed for use in older design, large capacity six and eight cylinder petrol engines. Especially suited for use in these types of engines suffering from excessive oil consumption. Suitable for use in selected competition applications including speedway, drags and circuit racing.

Customer Benefits

• Superior operating temperature viscosity helps to control oil consumption and maintain oil pressure under arduous conditions

• Longer engine life by reducing formation of high temperature engine deposits and by wear reduction from a high operating temperature viscosity

The Healey Factory Code:HPR50

RRP A$66.55

________________________________________________________________________________________

LIMSLIP 85W-140 2.5ltr

Premium extreme pressure automotive gear oils meeting the requirements of API GL-5, obsolete GL-6 and the proposed PG-2 category.

Application: Designed for use in limited slip (or spin resistant) rear axles on passenger cars, light commercials, 4WDs. All Penrite Limslip oils may be used in conventional hypoid rear axles. Penrite Limslip 140 is particularly recommended in higher ambient conditions, or for quietening noisy differentials where the noise is due to wear, thus prolonging the life of the unit before rebuild is required.

Customer Benefits

• Superior thermal stability, maintaining cleanliness of critical parts thus extending the life of the components.

• Superior protection against scoring and spalling wear which can occur under repeated shock load conditions.

• Quiet, shudder free operation due to use of selected friction modifiers.

The Healey Factory Code:LIM025

RRP A$23.90

________________________________________________________________________________________

HYPOID 80W-90 1ltr

Premium extreme pressure automotive gear oil, manufactured using highly refined mineral oils, advanced viscosity index improver and an additive chemistry that uses clean gear technology for better performance and component life.

Application: Designed for use in transmissions, transfer cases, final drives and differentials of passenger cars, light commercials, 4WDs .

Customer Benefits

• Superior thermal stability, maintaining cleanliness of critical parts thus extending the life of the components by reducing abrasive wear.

• Longer drain intervals by resisting high temperature degradation.

• Superior protection against scoring and spalling wear which can occur under repeated shock load conditions.

• Compatible with copper alloy components and protects against corrosion.

The Healey Factory Code:80/901

RRP A$14.20

________________________________________________________________________________________

SIN RACING COOLANT 1 Litre

Penrite SIN Racing Coolant is a red coloured, water based coolant that uses a hybrid of modern mono/diacid technology and conventional inhibitors for maximum heat transfer and lower running temperatures.

Application: It is formulated for use in all water cooled 4 stroke and 2 stroke engines in racing applications where glycol based coolants are banned, or where high engine operating temperatures are a problem.

How To Use It: Use at a rate of 12% in good quality water to a maximum of about 15% (or one part coolant to 7 parts water, 1:7)

Customer Benefits:

• Leaves no slippery residue if dropped on the track.

• Improves radiator efficiency as it contains no nitrates or borates and only a minimum of the silicates which   reduce heat dissipation.

• Biodegradable and environmentally friendly.

• Lower engine operating temperatures are attainable due to superior heat transfer characteristics compared to products containing ethylene glycol.

• Lasts 3 to 5 years or 150,000km when used and maintained at the correct concentration.

The Healey Factory Code:RC1001

RRP A$30.10

________________________________________________________________________________________

BRAKE FLUID SUPER DOT 4 500ml

Penrite Brake Fluid Super DOT 4 is a high quality, non-petroleum based, premium fully synthetic brake fluid designed for use in wide range of brake and clutch applications where DOT 3, DOT 4 or Super DOT 4 products are called for.

Application: Recommended for re-fill or top-up of brake and clutch systems in passenger cars. For best results, always flush system with Penrite Brake Fluid Super DOT 4 if using for the first time before refilling the system. Silicone type assembly compounds should not be used in conjunction with this product.

CAUTION: Brake Fluids are naturally hydroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly and product used within 3 months.

Customer Benefits

• Excellent braking response due to minimal vapour formation over a wide temperature range, ensuring good braking performance.

• High wet boiling point ensuring retention of stopping power over life of fluid.

• Compatible with all common brake system materials. Compatible with DOT 5.1 (low temperature, non-silicone type).

The Healey Factory Code:BRA500

RRP A$12.95

________________________________________________________________________________________

SHOCKER OIL No.1 500ml

Oil containing anti-corrosion and anti-wear additives designed specifically for lever arm and vane type shock absorbers fitted to cars covering the vintage and classic period.

Application: Is suitable for use in both single and double action Delco type shock absorbers as fitted to cars such as Buick, Chrysler, Dodge, Plymouth and Oldsmobile. May also be used in Gabriel type shock absorbers and Armstrong type lever arm shock absorbers as fitted to many English makes of the 40’s, 50’s and 60’s. Also ideal in vehicles with a built in central jacking system such as the “Jackall System”.

The Healey Factory Code: SHOCK

RRP A$9.75

________________________________________________________________________________________

STEERING BOX LUBE 500ml

Penrite Steering Box Lube is an extreme pressure, lithium based grease, blended with effective anti-wear, rust and oxidation inhibitors.

Application: Penrite Steering Box Lube may be used in veteran and Vintage motorcycle and car gear boxes and steering boxes.

Normal operating temperature range is from -20 oC to 130 oC.

Customer Benefits

• Extends bearing and gear life by minimising wear and shock loads

• Does not splash so maximises lubrication efficiency

• Resists leakage even under heavily loaded conditions

• Resists squeeze out

• Good low and high temperature fluidity

• Protects against rust and corrosion

• Good water resistance

The Healey Factory Code: STEER

RRP A$10.05

_________________________________________________________________________________________

SU DAMPER OIL 150ml

Mineral based oil containing anti-corrosion and anti-wear additives for the lubrication of pistons and dampers in SU carburettors.

Application: Is suitable for post 1940 vehicles using SU and Stromburg carburettors incorporating a damper in the dashpot assembly. The damper assembly is attached to the cap and be seen when the cap is removed.

The Healey Factory Code: SU DAMPER OIL

RRP A$6.05

_______________________________________________________________________________________

VALVESHIELD 250ml

Penrite Valveshield is a petrol treatment containing a combination of proven organic potassium valve seat recession and synthetic detergent additives, formulated to minimise valve seat recession (VSR) in vehicles designed to run on leaded petrol. It meets the valve seat wear protection requirements of both AS 4430.2- 1996 and the Federation of Vintage Motor Clubs (UK).

Application: Penrite Valveshield should be used as per the dosage table. For best mixing, it should be added just prior to filling the fuel tank. Penrite Valveshield is specifically designed for use in older vehicles designed to run on leaded petrol. It should be added to either unleaded or premium unleaded petrol at the recommended treatment level to give the VSR protection equivalent or better to that of leaded petrol.

Customer Benefits

• Reduces valve seat recession (VSR) therefore maintaining valve life.

• Improves petrol lubricity extending life of some older types of fuel pumps and injection

systems.

• Compatible with catalytic converters.

• Prevents corrosion

• Maintains fuel economy by using an advanced synthetic detergent additive to keep the fuel system clean.

The Healey Factory Code: VSHIELD250

RRP A$10.55

________________________________________________________________________________________

RADIATOR FLUSH 

Radiator Flush is a fast acting, alkaline cleaner which removes rust, scale and other deposits from automotive cooling systems.

This product should be used prior to new coolant being added to the vehicles cooling system as this will ensure your cooling system is free from rust, scale or any other residue which could block or foul your cooling system.

It will also neutralise any leftover coolant remaining in the engine and will ensure the new coolant will function as intended.

Application

Radiator Flush is recommended to clean out the cooling system of all types of motorcycles, cars, 4WD’s, light & heavy commercial vehicles and stationary engines.

Customer Benefits

Use 1 bottle for up to 15 Litres capacity

Fast acting, cleans in 7 minutes

Removes internal rust & corrosion

Improves cooling system circulation

Harmless to all metals, rubber & water pump seals

Compatible with all types of coolants

Improves cooling system performance

Non-acidic formulation

The Healey Factory Code: ADRF375

RRP A$11.25

________________________________________________________________________________________

Your Name (required)

Your Email (required)

Subject

Your Message